Tailgate lock that fits the 2021s? | Page 2 - F150 Lightning Forum

My XLT has a locking tailgate and I imagine that most do nowadays. However, the latch is completely exposed from inside the bed and it is only a matter of time before someone figures out how to jimmy it open and posts it on YouTube.



I looked into getting another tailgate to debadge and fill the embossed F-150 figures and even without the hardware or camera and light, it’s super expensive.

I might look into putting in a lock or hose clamp even though I like to remove the tailgate to sweep up the bed. Or maybe even fabricate an alloy plate to cover the exposed latch. Sponsored

The Ford Accessory website says the right part for s is VFL3Z--B. Has anyone tried it and had a problem with fit?

Update: I took a closer look at the tailgate (see the photo below). It looks like the part above will not fit. But I think the best solution is to replace the holding screw with a tamper proof one, which you can get at McMaster. I'm pretty sure the screw is a 6mm x 1, 12mm.

That’s precisely what I said. Good to see someone else to same conclusion.

The Ford Accessory website says the right part for s is VFL3Z--B. Has anyone tried it and had a problem with fit?

Update: I took a closer look at the tailgate (see the photo below). It looks like the part above will not fit. But I think the best solution is to replace the holding screw with a tamper proof one, which you can get at McMaster. I'm pretty sure the screw is a 6mm x 1, 12mm.

How confident are you about the screw size? If so, that’s an easy purchase. The 6mm x 1mm x 12mm worked perfectly. The Ford bolt has an integrated washer that is attached to the bolt, so I had to find another. I also used a drop of Loctite blue and some SuperLube and I’m good to go. I put an extra tamper proof Torq key in the truck. I think this would be pretty hard to get off without that key, not sure how you could do it without ruining the bolt.

The 6mm x 1mm x 12mm worked perfectly. The Ford bolt has an integrated washer that is attached to the bolt, so I had to find another. I also used a drop of Loctite blue and some SuperLube and I’m good to go. I put an extra tamper proof Torq key in the truck. I think this would be pretty hard to get off without that key, not sure how you could do it without ruining the bolt.

Where do I find the torq key? all I have is a ratchet set with those

The 6mm x 1mm x 12mm worked perfectly. The Ford bolt has an integrated washer that is attached to the bolt, so I had to find another. I also used a drop of Loctite blue and some SuperLube and I’m good to go. I put an extra tamper proof Torq key in the truck. I think this would be pretty hard to get off without that key, not sure how you could do it without ruining the bolt.

Hello, I have a ratchet set with that, but is there a wrench or other "key" out there that I can throw in the glove box?

You need a special tool for tamper resistant Torq bolts. You can get the tool at McMaster, only $3 or so. Basically like a hex key with a special end.

Ty, I took your lead and ordered the bolts, but looking around their site I didn't see a simple cheap tool like you describe. I was at work so might have missed it in my haste...I'll go back in there.

Ty, I took your lead and ordered the bolts, but looking around their site I didn't see a simple cheap tool like you describe. I was at work so might have missed it in my haste...I'll go back in there.

There is a link to the tool in the description of the bolts on the page where you order the bolts. Or you can search for Tamper-resistant torq and it'll pop up. The part number for the T27 L-key used on that bolt is A29.

There is a link to the tool in the description of the bolts on the page where you order the bolts. Or you can search for Tamper-resistant torq and it'll pop up. The part number for the T27 L-key used on that bolt is A29.

Thank you Lippy, meant to circle back yesterday. Really appreciate your help. I ordered 2. Very kind of you to make it basically idiot proof for me! Lol

Anyone come across a tailgate lock that fits the s? I ordered the typical McGard one but the plastic piece (for Ford’s) doesn’t fit. Did the tailgate change? Also seem to have a bolt currently holding it in place and appears if that was just a unique pattern bold (aka wheel locks) it would serve the same purpose.

Anyone put one on you’re happy with?

This was on the truck when I got it.
I vaguely recall discussing this when trying to order a .
I guess the sales guy went ahead and put one on my , but I was not charged for it at all.
It is a McGard lock with a Ford part number
Didn't know where else to post this. Observations on locking tailgate from a person coming from an f150 with a keyed lock on the tailgate. Now when truck is locked, tailgate is also and with cover locked seems pretty secure. It won't unlock unless key fob in pocket but can open tailgate with truck still locked and key fob close. For me works exactly how I would want it to. For past truck owners this may have always been that way the last few years but loving the details.

Didn't know where else to post this. Observations on locking tailgate from a person coming from an f150 with a keyed lock on the tailgate. Now when truck is locked, tailgate is also and with cover locked seems pretty secure. It won't unlock unless key fob in pocket but can open tailgate with truck still locked and key fob close. For me works exactly how I would want it to. For past truck owners this may have always been that way the last few years but loving the details.

nothing is secure
I can see someone ripping the tailgate bezel right off for linkage access. Been being done for years.
Once that is off and the gate dropped, no big deal to remove a bolt and abscond with the gate.
Even the little hinge lock can be breached with some effort, and noise.
This lock comes with one of those keys with a weird design on the end, and a key number to match the flower shape of the key.
Otho got is foolproof, but every little bit will slow the crooks

nothing is secure
I can see someone ripping the tailgate bezel right off for linkage access. Been being done for years.
Once that is off and the gate dropped, no big deal to remove a bolt and abscond with the gate.
Even the little hinge lock can be breached with some effort, and noise.
This lock comes with one of those keys with a weird design on the end, and a key number to match the flower shape of the key.
Otho got is foolproof, but every little bit will slow the crooks

This one: https://accessories.ford.com/kit-lock-cylinder-repair-.html ? The part number matches up, but it looks a little different in your picture and the one in the link. It's hard to tell because of the different angles in the pictures.